Chapter 4: WaterDistribution 91 http://www.pwcgov.org/government/dept/publicworks/pages/site-development- forms.aspx a. Prince William Water will assign a plan n umber after the first review; the Applicant shall add Prince William Water plan number to the title block. 2. The Applicant shall report the following information on the cover sheet for Project Plan submission within an incorporated Town: a. A vicinity map and site location. b. Plans shall have a unique title. c. Prince William Water will assign a plan number after the first review; the Applicant shall add the Prince William Water plan number to the title block. d. Identify the Town where the project resides and the contact information for the Town representative managing the plan application. e. Title block with the property address and GPIN, owner information,developer information, Engineer’s information, and report the Town representative managing the plan application. B. Plan View 1. The Applicant shall provide plan views at 1:30 scale (1-inch to 30-feet). Other scales are only permitted with written permission from the Development Manager or designee. 2. The Applicant shall provide water main designs in context with site grading,right-of- way limits, other utilities (including dry utilities), structures, buildings, walls, light poles, traffic controls, sidewalks, trails, walkways, concrete pads, and fences. 3. The Applicant shall place water main design information in either the gradingand/or utility plan sheets. 4. Show and correctly identify all existing water mains, valves, blow-off assemblies,air releases, meters, and hydrants within 100-feet of the project limits or plan sheet limits, whichever is greater. Existing water mains shall be identified with the pipe size, material, and identifier, example: 12-inch DIP WM. Information for existing water mains can be obtained from Prince William Water utility records or from a Prince William Water utility map obtained by request through its website. 5. Show all proposed water meter, water mains, valves, reducers, fittings, and hydrants withthe designated line type and symbol per Table 4-3.
